Contents

1 Overview

A dendrogram diagram displays binary trees focused on representing hierarchical relations between the tree elements. A dendrogram contains nodes, branches (edges), a root, and leaves (Figure 1A). The root is where the branches and nodes come from, indicating the direction to the leaves, i.e., the terminal nodes.

Most of the space of a dendrogram layout is used to arrange branches and inner nodes, with limited space to the leaves. For large dendrograms, the leaf labels are often squeezed to fit into small slots. Therefore, a dendrogram may not provide the best layout when the information to be displayed should highlight the leaves.

The TreeAndLeaf package aims to improve the visualization of the dendrogram leaves by combining tree and force-directed layout algorithms, shifting the focus of analysis to the leaves (Figure 1B). The package’s workflow is summarized in Figure 1C.

Figure 1. TreeAndLeaf workflow summary. (A,B) The dendrogram in A is used to construct the graph in B. (C) The main input for the TreeAndLeaf package consists of a dendrogram, and then the package transforms the dendrogram into a graph representation. The finest graph layout is achieved by a two-steps process, starting with an unrooted tree diagram, which is subsequently relaxed by a force-directed algorithm applied to the terminal nodes of the tree. The final tree-and-leaf layout varies depending on the initial state, which can be obtained by other tree layout algorithms (see section 3 for examples using ggtree layouts to setup the initial state).

2 Quick Start

This section provides a basic example using the R built-in USArrests dataset. The USArrests is a dataframe available in the user’s workspace. To know more about this dataframe, please query ?USArrests in the R console. We will build a dendrogram from the USArrests dataset, then transform the dendrogram into a tree-and-leaf diagram, and the result will be visualized in the RedeR application.

2.1 Package and data requirements

#-- Libraries required in this section:
#-- TreeAndLeaf(>=1.4.2), RedeR(>=1.40.4), Bioconductor >= 3.13 (R >= 4.0)
# BiocManager::install(c("TreeAndLeaf","RedeR"))
# install.packages(c("igraph","RColorBrewer"))

#-- Load packages
library("TreeAndLeaf")
library("RedeR")
library("igraph")
library("RColorBrewer")
#-- Check data
dim(USArrests)
#> [1] 50  4
head(USArrests)
#>            Murder Assault UrbanPop Rape
#> Alabama      13.2     236       58 21.2
#> Alaska       10.0     263       48 44.5
#> Arizona       8.1     294       80 31.0
#> Arkansas      8.8     190       50 19.5
#> California    9.0     276       91 40.6
#> Colorado      7.9     204       78 38.7

2.2 Building a dendrogram example

In order to build a dendrogram from the USArrests dataset, we need a distance matrix. We will use the default “euclidean distance” method from the dist() function, and then the “average” method from hclust() function to create the dendrogram.

hc <- hclust(dist(USArrests), "ave")
plot(hc, main="Dendrogram for the 'USArrests' dataset",
     xlab="", sub="")

2.3 Converting the hclust object into a tree-and-leaf object

The treeAndLeaf function will transform the hclust into an igraph object, including some basic graph attributes to display in the RedeR application.

#-- Convert the 'hclust' object into a 'tree-and-leaf' object
tal <- treeAndLeaf(hc)

2.4 Setting graph attributes

The att.mapv() function can be used to add external annotations to an igraph object, for example, mapping new variables to the graph vertices. We will add all USArrests variables to the tal object. To map one object to another it is essential to use the same mapping IDs, set by the refcol parameter, which points to a column in the input annotation dataset. In this example, refcol = 0 indicates that the USArrests rownames will be used as mapping IDs. To check the IDs in the igraph vertices, please type V(tal)$name in the R console.

#--- Map attributes to the tree-and-leaf
#Note: 'refcol = 0' indicates that 'dat' rownames will be used as mapping IDs
tal <- att.mapv(g = tal, dat = USArrests, refcol = 0)

Now we use the att.setv() wrapper function to set attributes in the tree-and-leaf diagram. To see all attributes available to display in the RedeR application, please type ?addGraph in the R console. The graph attributes can also be customized following igraph syntax rules.

#--- Set graph attributes using the 'att.setv' wrapper function
pal <- brewer.pal(9, "Reds")
tal <- att.setv(g = tal, from = "Murder", to = "nodeColor", 
                cols = pal, nquant = 5)
tal <- att.setv(g = tal, from = "UrbanPop", to = "nodeSize",
                xlim = c(10, 50, 5), nquant = 5)

#--- Set graph attributes using 'att.addv' and 'att.adde' functions
tal <- att.addv(tal, "nodeFontSize", value = 15, index = V(tal)$isLeaf)
tal <- att.adde(tal, "edgeWidth", value = 3)

2.5 Plotting a tree-and-leaf diagram

The next steps will call the RedeR application, and then display the tree-and-leaf diagram in an interactive R/Java interface. The initial layout will show an unrooted tree diagram, which will be subsequently relaxed by a force-directed algorithm applied to the terminal nodes of the tree.

#--- Call RedeR application
rdp <- RedPort()
calld(rdp)
resetd(rdp)
#--- Send the tree-and-leaf to the interactive R/Java interface
addGraph(obj = rdp, g = tal, gzoom=75)

#--- Call 'relax' to fine-tune the leaf nodes
relax(rdp, p1=25, p2=200, p3=5, p5=5, ps=TRUE)

At this point, the user can interact with the layout process to achieve the best or desired layout; we suggest fine-tuning the force-directed algorithm parameters, either through the R/Java interface or the command line relaxation function. Note that the unroot tree diagram represents the initial state; then a relaxing process should start until the finest graph layout is achieved. The final layout varies depending on the initial state, which can also be adjusted by providing more or less room for the spatial configuration (e.g. via gzoom parameter).

#--- Add legends
addLegend.color(obj = rdp, tal, title = "Murder Rate", 
                position = "topright")
addLegend.size(obj = rdp, tal, title = "Urban Population Size",
               position = "bottomright")

3 Setting the initial tree-and-leaf state with ggtree layouts

The tree diagram represents the initial state of a tree-and-leaf, which is then relaxed by a force-directed algorithm applied to the terminal nodes. Therefore, the final tree-and-leaf layout varies depending on the initial state. The treeAndLeaf package also accepts ggtree layouts to setup the initial state. For example, next we show a tree diagram generated by the ggtree package, and then we apply the tree-and-leaf transformation.

3.1 Package and data requirements

#-- Libraries required in this section:
#-- TreeAndLeaf(>=1.4.2), RedeR(>=1.40.4), Bioconductor >= 3.13 (R >= 4.0)
# BiocManager::install(c("TreeAndLeaf","RedeR","ggtree))
# install.packages(c("igraph","ape", "dendextend", "dplyr", 
#                    "ggplot2", "RColorBrewer"))

#-- Load packages
library("TreeAndLeaf")
library("RedeR")
library("igraph")
library("ape")
library("ggtree")
library("dendextend")
library("dplyr")
library("ggplot2")
library("RColorBrewer")

3.2 Building and plotting a phylo tree with ggtree layouts

#--- Generate a random phylo tree
phylo_tree <- rcoal(300)

#--- Set groups and node sizes
group <- size <- dendextend::cutree(phylo_tree, 10)
group[] <- LETTERS[1:10][group]
size[] <- sample(size)
group.df <- data.frame(label=names(group), group=group, size=size)
phylo_tree <- dplyr::full_join(phylo_tree, group.df, by='label')

#--- Generate a ggtree with 'daylight' layout
pal <- brewer.pal(10, "Set3")
ggt <- ggtree(phylo_tree, layout = 'daylight', branch.length='none')

#--- Plot the ggtree
ggt + geom_tippoint(aes(color=group, size=size)) +
  scale_color_manual(values=pal) + scale_y_reverse()

3.3 Applying tree-and-leaf transformation to ggtree layouts

#-- Convert the 'ggtree' object into a 'tree-and-leaf' object
tal <- treeAndLeaf(ggt)

#--- Map attributes to the tree-and-leaf
#Note: 'refcol = 1' indicates that 'dat' col 1 will be used as mapping IDs
tal <- att.mapv(g = tal, dat = group.df, refcol = 1)

#--- Set graph attributes using the 'att.setv' wrapper function
tal <- att.setv(g = tal, from = "group", to = "nodeColor",
                cols = pal)
tal <- att.setv(g = tal, from = "size", to = "nodeSize",
                xlim = c(10, 50, 5))

#--- Set graph attributes using 'att.addv' and 'att.adde' functions
tal <- att.addv(tal, "nodeFontSize", value = 1)
tal <- att.addv(tal, "nodeLineWidth", value = 0)
tal <- att.addv(tal, "nodeColor", value = "black", index=!V(tal)$isLeaf)
tal <- att.adde(tal, "edgeWidth", value = 3)
tal <- att.adde(tal, "edgeColor", value = "black")
#--- Call RedeR application
rdp <- RedPort()
calld(rdp)
resetd(rdp)
#--- Send the tree-and-leaf to the interactive R/Java interface
addGraph(obj = rdp, g = tal, gzoom=50)

#--- Select inner nodes, preventing them from relaxing
selectNodes(rdp, V(tal)$name[!V(tal)$isLeaf], anchor=TRUE)

#--- Call 'relax' to fine-tune the leaf nodes
relax(rdp, p1=25, p2=100, p3=5, p5=1, p8=5, ps=TRUE)

#--- Add legends
addLegend.color(obj = rdp, tal, title = "Group", 
                position = "topright",vertical=T)
addLegend.size(obj = rdp, tal, title = "Size", 
               position = "topleft", 
               vertical=T, dxtitle=10)

4 Case Study 1: visualizing a large dendrogram

4.1 Context

This section follows the same steps described in the Quick Start, but using a larger dendrogram derived from the R built-in quakes dataset. The quakes is a dataframe available in the user’s workspace. To know more about this dataframe, please query ?quakes in the R console. We will build a dendrogram from the quakes dataset, then transform the dendrogram into a tree-and-leaf diagram, and the result will be visualized in the RedeR application.

4.2 Package and data requirements

#-- Libraries required in this section:
#-- TreeAndLeaf(>=1.4.2), RedeR(>=1.40.4), Bioconductor >= 3.13 (R >= 4.0)
# BiocManager::install(c("TreeAndLeaf","RedeR"))
# install.packages(c("igraph", "RColorBrewer"))

#-- Load packages
library(TreeAndLeaf)
library(RedeR)
library(igraph)
library(RColorBrewer)
#-- Check data
dim(quakes)
#> [1] 1000    5
head(quakes)
#>      lat   long depth mag stations
#> 1 -20.42 181.62   562 4.8       41
#> 2 -20.62 181.03   650 4.2       15
#> 3 -26.00 184.10    42 5.4       43
#> 4 -17.97 181.66   626 4.1       19
#> 5 -20.42 181.96   649 4.0       11
#> 6 -19.68 184.31   195 4.0       12
#-- Building a large dendrogram
hc <- hclust(dist(quakes), "ave")
plot(hc, main="Dendrogram for the 'quakes' dataset",
     xlab="", sub="")

4.3 Building and plotting a large tree-and-leaf diagram

#-- Convert the 'hclust' object into a 'tree-and-leaf' object
tal <- treeAndLeaf(hc)
#--- Map attributes to the tree-and-leaf
#Note: 'refcol = 0' indicates that 'dat' rownames will be used as mapping IDs
tal <- att.mapv(tal, quakes, refcol = 0)

#--- Set graph attributes using the 'att.setv' wrapper function
pal <- brewer.pal(9, "Greens")
tal <- att.setv(g = tal, from = "mag", to = "nodeColor",
                cols = pal, nquant = 10)
tal <- att.setv(g = tal, from = "depth", to = "nodeSize",
                xlim = c(40, 120, 20), nquant = 5)

#--- Set graph attributes using 'att.addv' and 'att.adde' functions
tal <- att.addv(tal, "nodeFontSize", value = 1)
tal <- att.adde(tal, "edgeWidth", value = 10)

The next steps will call the RedeR application, and then display the tree-and-leaf diagram in an interactive R/Java interface. The initial layout will show an unrooted tree diagram, which will be subsequently relaxed by a force-directed algorithm applied to the terminal nodes of the tree.

#--- Call RedeR application
rdp <- RedPort()
calld(rdp)
resetd(rdp)
#--- Send the tree-and-leaf to the interactive R/Java interface
addGraph(obj = rdp, g = tal, gzoom=10)

#--- Call 'relax' to fine-tune the leaf nodes
relax(rdp, p1=25, p2=200, p3=10, p4=100, p5=10, ps=TRUE)
#--- Add legends
addLegend.color(obj = rdp, tal, title = "Richter Magnitude",
                position = "bottomright")
addLegend.size(obj = rdp, tal, title = "Depth (km)")

5 Case Study 2: visualizing a phylogenetic tree

5.1 Context

This section generates a tree-and-leaf diagram from a pre-computed phylo tree object. We will use a phylogenetic tree listing 121 eukaryotes, available from the geneplast package.

5.2 Package and data requirements

#-- Libraries required in this section:
#-- TreeAndLeaf(>=1.4.2), RedeR(>=1.40.4), Bioconductor >= 3.13 (R >= 4.0)
# BiocManager::install(c("TreeAndLeaf","RedeR","geneplast))
# install.packages(c("igraph","ape", "RColorBrewer"))

#-- Load packages
library(TreeAndLeaf)
library(RedeR)
library(igraph)
library(ape)
library(geneplast)
library(RColorBrewer)
#-- Load data and plot the phylogenetic tree
data("spdata")
data("gpdata.gs")
plot(phyloTree)

5.3 Building and plotting a tree-and-leaf from a phylogenetic tree

#--- Drop organisms not listed in the 'spdata' annotation
phyloTree$tip.label <- as.character(phyloTree$tip.label)
tokeep <- phyloTree$tip.label %in% spdata$tax_id
pruned.phylo <- drop.tip(phyloTree, phyloTree$tip.label[!tokeep])
#-- Convert the phylogenetic tree into a 'tree-and-leaf' object
tal <- treeAndLeaf(pruned.phylo)

#--- Map attributes to the tree-and-leaf
#Note: 'refcol = 1' indicates that 'dat' col 1 will be used as mapping IDs
tal <- att.mapv(g = tal, dat = spdata, refcol = 1)

#--- Set graph attributes using the 'att.setv' wrapper function
pal <- brewer.pal(9, "Purples")
tal <- att.setv(g = tal, from = "genome_size_Mb",
                to = "nodeSize", xlim = c(120, 250, 1), nquant = 5)
tal <- att.setv (g = tal, from = "proteins",
                 to = "nodeColor", nquant = 5,
                 cols = pal, na.col = "black")
#--- Add graph attributes using 'att.adde' and 'att.addv' functions
tal <- att.addv(tal, "nodeFontSize", value = 10)
tal <- att.adde(tal, "edgeWidth", value = 20)

# Set species names to 'nodeAlias' attribute
tal <- att.setv(tal, from = "sp_name", to = "nodeAlias")

# Select a few names to highlight in the graph
tal <- att.addv(tal, "nodeFontSize", value = 100, 
       filter=list('name'=sample(pruned.phylo$tip.label,30)))
tal <- att.addv(tal, "nodeFontSize", value = 100, 
                filter=list('name'="9606")) #Homo sapiens
# Call RedeR
rdp <- RedPort()
calld(rdp)
resetd(rdp)

#--- Send the tree-and-leaf to the interactive R/Java interface
addGraph(obj = rdp, g = tal, gzoom=10)

#--- Call 'relax' to fine-tune the leaf nodes
relax(rdp, ps=TRUE)
#--- Add legends
addLegend.color(rdp, tal, title = "Proteome Size (n)")
addLegend.size(rdp, tal, title = "Genome Size (Mb)")

6 Case Study 3: visualizing a non-binary tree

6.1 Context

The TreeAndLeaf package is designed to layout binary trees, but it can also layout other graph configurations. To exemplify this case, we will use a larger phylogenetic tree available from the geneplast package, and for which some inner nodes have more than two children, or non-binary nodes.

6.2 Package and data requirements

#-- Libraries required in this section:
#-- TreeAndLeaf(>=1.4.2), RedeR(>=1.40.4), Bioconductor >= 3.13 (R >= 4.0)
# BiocManager::install(c("TreeAndLeaf","RedeR","geneplast))
# install.packages(c("igraph","ape", "RColorBrewer"))

#-- Load packages
library(TreeAndLeaf)
library(RedeR)
library(igraph)
library(ape)
library(geneplast)
library(RColorBrewer)
#-- Load data 
data("spdata")
data("phylo_tree")
#--- Drop organisms not listed in the 'spdata' annotation
tokeep <- phylo_tree$tip.label %in% spdata$tax_id
pruned.phylo <- drop.tip(phylo_tree, phylo_tree$tip.label[!tokeep])

6.3 Building and plotting a tree-and-leaf for a non-binary tree

#-- Convert the phylogenetic tree into a 'tree-and-leaf' object
tal <- treeAndLeaf(pruned.phylo)
#--- Map attributes to the tree-and-leaf using "%>%" operator
tal <- tal %>%
  att.mapv(dat = spdata, refcol = 1) %>%
  att.setv(from = "genome_size_Mb", to = "nodeSize",
           xlim = c(120, 250, 1), nquant = 5) %>%
  att.setv(from = "proteins", to = "nodeColor", nquant = 5,
           cols = brewer.pal(9, "Blues"), na.col = "black") %>%
  att.setv(from = "sp_name", to = "nodeAlias") %>%
  att.adde(to = "edgeWidth", value = 20) %>%
  att.addv(to = "nodeFontSize", value = 10) %>%
  att.addv(to = "nodeFontSize", value = 100,
      filter = list("name" = sample(pruned.phylo$tip.label, 30))) %>%
  att.addv(to = "nodeFontSize", value = 100, 
           filter = list("name" = "9606"))
# Call RedeR
rdp <- RedPort()
calld(rdp)
resetd(rdp)

#--- Send the tree-and-leaf to the interactive R/Java interface
addGraph(obj = rdp, g = tal, gzoom=5)

#--- Call 'relax' to fine-tune the leaf nodes
relax(rdp, ps=TRUE)
#--- Add legends
addLegend.color(rdp, tal, title = "Proteome Size (n)")
addLegend.size(rdp, tal, title = "Genome size (Mb)")

7 Session information

#> R version 4.4.1 (2024-06-14)
#> Platform: x86_64-pc-linux-gnu
#> Running under: Ubuntu 24.04.1 LTS
#> 
#> Matrix products: default
#> BLAS:   /home/biocbuild/bbs-3.20-bioc/R/lib/libRblas.so 
#> LAPACK: /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3.12.0
#> 
#> locale:
#>  [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C              
#>  [3] LC_TIME=en_GB              LC_COLLATE=C              
#>  [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8   
#>  [7] LC_PAPER=en_US.UTF-8       LC_NAME=C                 
#>  [9] LC_ADDRESS=C               LC_TELEPHONE=C            
#> [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C       
#> 
#> time zone: America/New_York
#> tzcode source: system (glibc)
#> 
#> attached base packages:
#> [1] stats     graphics  grDevices utils     datasets  methods   base     
#> 
#> other attached packages:
#> [1] geneplast_1.32.0   ape_5.8            RColorBrewer_1.1-3 igraph_2.1.1      
#> [5] RedeR_3.2.0        TreeAndLeaf_1.18.0 BiocStyle_2.34.0  
#> 
#> loaded via a namespace (and not attached):
#>  [1] jsonlite_1.8.9      compiler_4.4.1      BiocManager_1.30.25
#>  [4] highr_0.11          Rcpp_1.0.13         tinytex_0.53       
#>  [7] magick_2.8.5        parallel_4.4.1      jquerylib_0.1.4    
#> [10] scales_1.3.0        yaml_2.3.10         fastmap_1.2.0      
#> [13] lattice_0.22-6      R6_2.5.1            knitr_1.48         
#> [16] bookdown_0.41       snow_0.4-4          munsell_0.5.1      
#> [19] bslib_0.8.0         rlang_1.1.4         cachem_1.1.0       
#> [22] xfun_0.48           sass_0.4.9          cli_3.6.3          
#> [25] magrittr_2.0.3      digest_0.6.37       grid_4.4.1         
#> [28] lifecycle_1.0.4     nlme_3.1-166        evaluate_1.0.1     
#> [31] glue_1.8.0          data.table_1.16.2   colorspace_2.1-1   
#> [34] rmarkdown_2.28      tools_4.4.1         pkgconfig_2.0.3    
#> [37] htmltools_0.5.8.1